PetSafe Dog Fences are the most versatile underground dog fences available and are very easy to use and install.

The PetSafe Standard Radio Fence is Safe and Effective for all pets 5 pounds and up. Features the PetSafe Ultralight Receiver with One Level of Correction. Perfect for any yard up to 10 Acres. The best, most advanced dog fence on the market today.

Features:

• Ultralight Receiver weighs only 1.5 ounces
• Small enough for Toy or Small Breeds, yet strong enough for large and hard to train dogs!
• Adjustable Collar 10" - 26"
• Waterproof Receiver
• Transmitter can cover up to 10 acres for containment training function

The PetSafe Standard Radio Fence uses the patented ASICS Chip, the only microprocessor in the industry built specifically for pet fences by PetSafe. It has 3,000 filters to eliminate any possibility of interference from outside sources. The transmitter has a wire break indicator light, a power on indicator light, and an audio wire break alarm.

What's In The Box?

PRF-3004W PetSafe Standard Underground Radio Fence Kit For Yards up to 1/3 Acre Includes; Transmitter, Receiver on a adjustable collar, extra receiver probes (to work with all lengths hair), 500' Boundary Wire, 50 Boundary Flags, A Printed Manual and A FREE DVD covering the installation and dog training.

If your coverage area is larger than 1/3 acre, see chart below to calculate the amount of additional wire you would require.

Your "Underground Fence" does Not have to be installed underground! Save all the digging and cut your installation time in half! All you need is one box of Fence Staples (SS-100) for every 500 feet of wire you order for above ground installation.

Use this guide to determine how much wire you need to enclose your yard. These figures are estimates, based on typical layouts. You may need more wire if you're doing interior loops to boundary off gardens, swimming pools or other protected areas. We will provide you wire in 500 foot increments on 500 or 1,000 foot spools.

For larger areas, use the following formula: Multiply the total acreage by 43,560- i.e. 10 acres x 43,560 = 435,600

Find the square root of the above number - square root of 435,600 = 660 (this is the length of each side of a 10 acre area that is square in shape. Even if your area is not square, if you multiply this number by four, this is the approximate length of the four sides of a 10 acre area.)

Therefore, one would need approximately 2,640 feet of wire to enclose the perimeter of a 10 acre area. You will need additional wire to run from the transmitter to the perimeter and/or for any interior loops, etc.